Steel Fishing / Work Boat
- Boat REF# · 317112
- Length · 37'10"
- Year · 1984
- Construction · Steel
- Underwater profile · Full-Displacement
- Sleeping berths · 4
- Engine · 1 x diesel 95hp, Perkins 6354 (1984)
- Lying · Isle of Wight
Extra Details
| Builder | Steelcraft |
|---|---|
| Lying | Isle of Wight |
| Fuel capacity | 88.0 USG Total - 2 Tanks |
| Water capacity | 44.0 USG Total - 1 Tanks |
| Last survey | 01/01/2017 |
Mechanical
| Engine | 1 x diesel 95hp |
|---|---|
| Engine make and model | Perkins 6354 (1984) |
| Engine Hours | Not Recorded |
| Engine Cooled | Direct |
| Steering | wheel |
| Drive | shaft |
| Prop(s) | 3 blade fixed bronze |
| Fuel consumption (approx) | 2.0 USG /hour At Cruising Speed |
| Cruising speed (approx) | 8 knots |
| Max speed (approx) | 10 knots |
| Engine spares |
|---|
Engine out and overhauled and new exhaust fitted
Hydraulic steering pipes replaced
New Bowman heat exchanger/oil coolers fitted to engine and gearbox
New battery charger and power controller
Dimensions
| Length | 37'10" |
|---|---|
| LWL | 32'10" |
| Beam | 13'1" |
| Draft Min | 3'11" |
| Draft Max | 4'3" |
| Airdraft | 19'8" |
| Displacement | 36,382.5lbs |
| Storage | Ashore |
Electrical Systems
12 volt battery, 240 shore power voltage, 6 batteries charged by: engine, shore power
Construction
| Construction | Steel |
|---|---|
| Underwater profile | Full-Displacement |
| Finish | 2 pack finish |
Former workboat with Cat 3 workboat certificate until 2022 (now expired)
Steel hull with considerable work undertaken since 2020 including rebuild and extension of wheelhouse
Accommodation
| Total # of berths | 4 |
|---|---|
| No. of double berths | 1 |
| No. of single berths | 2 |
| Cabin(s) | 2 |
| Sink | 1 |
| Shower | 1 |
| Heads | 1 heads (Manual) |
New Dometic 3 way fridge, Neptune 4500 cooker and gas water heater fitted
4 burner propane Stove
Accommodation
| Stove | |
|---|---|
| Broiler | |
| Oven | |
| Sink | |
| Refrigerator | |
| Pressurised water system | |
| Hot water system |
New Dometic 3 way fridge, Neptune 4500 cooker and gas water heater fitted
4 burner propane Stove
Deck Gear
| Rode | |
|---|---|
| Fenders | |
| Instrument Covers | |
| Bow Thruster |
2 anchors
(Delta 25kg and stern 15kg)
65'7" of chain
Maxpower CT100 bowthruster fitted
Nav Equipment
| Radar | |
|---|---|
| VHF | |
| Chart plotter | |
| Barometer | |
| Navigation lights |
Safety Equipment
| Liferaft |
|---|
4 bilge pumps (1 manual / 3 electric)
Broker's Comments
A former survey vessel, this steel workboat may look like you'd expect from outboard however, when you step into the newly rebuilt wheelhouse you realise just how much has been done to increase her versatility.
The hull has been epoxy primed and painted and a bowthruster added to improve manoeuvrability.
What was once a traditional fishing boat style short wheelhouse has been completely rebuilt and extended to provide a comfortable seating area (which converts to a double berth), galley and heads/shower area. Forward there is a pod style cabin creating additional berths and seating.
The foredeck is accessed via a deck hatch from inboard and the large aft deck would easily accommodate anglers or divers as it is or could be covered to use as seating.
There is still some work to do, however much of this is interior finishing which will allow her new owner to fit out based upon intended use and preference.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Owners FAQ's
How long have you owned the boat for?
3 years
Why are you selling her?
Lack of time
Where have you sailed her?
Locally (River Medina)